SPECIFICATIONS
- ELECTRICAL SWITCH : SINGLE POLE SPNO. SNAP ACTING CONTACTS
- ELECTRICAL RATINGS : UL(1054) : 16A, 3/4 HP 250VAC
- 50.000(X) CYCLES VDEEN61058-1 : 16A 250VAC, 50E3 T105, ALL RATINGS AT 85℃ MAX(190℉)(UL VDE APPROVED SWITCH)
- ELECTRICAL CONNECTORS : 1/4 INCH(6.3MM) MALE QUICK CONNECT TERMINALS
- PRESSURE CONNECTION : USE 1/8(3MM) OR 1/16(1.5MM) ID FLEXIBLE PLASTICS TUBING MAXIMUM HARDNESS 70 SHORE A
- MOUNTING : MOUNT SWITCH IN ANY PLANE THRU PANEL UP TO 3/32(2.4MM), THICK RECOMMENDED MOUNTING HOLE SIZE 13MM
- OPERATING TEMPERATURE RANGE : MAXIMUM 190℉(85℃) BAROMETRIC AND TEMPERATURE CHANGE COMPENSATION, PROVIDED INSIDE SWITCH
- CAUTION : THIS COMPENSATION IS SKIPPED IF USING 1/4 THREAD FOR, PRESSURE CONNECTION
- SWITCHING OPERATION : ALTERNATE(BISTABLE)
- OPERATING PRESSURE LOWER THAN : 30IN WC(900MM), 1.2PSI, 9KPa
- MAXIMUM OPERATING PRESSURE : 10PSIG(69KPa)
- SWITCH OPERATION : OPERATE ON A SEALED PRESSURE AIR DEPLACEMENT, DO NOT USE PRESSURE TRANSMITTERS WITH AIR, INPUT TO A VOID, PUMPING ACTION, USE AIR TRANSMITTERS WITH ENOUGH AIR VOLUME TO, ACHIEVE MINIMUM OPERATION PRESSURE
- CAUTION :TOO LONG CONNECTING TUBING AND/OR TOO SMALL PRESSURE, TRANSMITTER WILL NOT OPERATE THE AIR SWITCH OR WILL, OPERATE IF WITH A MOMENTARY ACTION
- HOUSING MATERIAL : UPPER COVER IS PA66 UL94 V2 BLACK, BOTTOM COVER IS ABS UL94HB BLACK
- PRESSURE MEDIA : AIR OR FLUIDS COMPATIBLE WITH ABS USED FOR HOUSING AND EPDM USED FOR EPDM MEMBRANCE IF USED AS PRESSURE SWITCH, THIS PRODUCT MUST BE CONNECTED BY THE 1/4 NPT THREAD AND NOT BY THE 4MM AIR SPOUT
- TEST REQUIREMENT : SWITCH MUST BE AIR ACTIVATED
- 100,000 ON/OFF CYCLES : 5 SECONDS ON/25 SECONDS OFF AT 16A 250V
- ACCESSORIES : PLASTICS NUT(BULK) UL RECOGNIZED CSA CERTIFIED
